We often get asked how can the customer be certain that their EAY60968801 power supply is bad before sending it for repair.
Nobody likes wasting time and money on moving good stuff around, including us.
Well there's a REALLY simple way of testing that particular board - and many others.
We've actually already disscussed it in a past article for another similar board:
http://blog.coppelltvrepair.com/2013/04/lg-50pg20-not-turning-on-is-power-board.html
In a nutshell, if you disconnect all cables but the AC power cable and then connect to AC the board should click once and all output voltages on it, including Vs should be present.
If the board clicks once and then once more within a second or so then it is bad.
The key here is to make sure you disconnect the other cables!
And here's a link to the repair service for the board:
http://www.coppelltvrepair.com/p/500/eay60968801-eax6139250112-lg-power-supply-board-repair-service-for-dead-or-clicking-on-and-off-problem
2 comments:
If the board clicks once and then once more within a second or so then it is bad.mil power source
I purchased the kit to fix the bad power supply problem. I Replaced all parts, and the 5V rail was working! However, this did not fix the entire problem -- symptoms were still the same. What is the next most likely issue?
Post a Comment