Wednesday, December 5, 2012

LV49152 digital audio amplifier for Sanyo DP46840

We recently had to work on a main board for Sanyo LCD TV from the DP series, specifically DP46840.

It had a hole burned in the audio amplifier IC LV49152 and we apparently had to replace it.

It turned out hard to find LV49152 here in the States, so if you find yourself in the same boat perhaps this will help:

http://www.coppelltvrepair.com/p/117/lv49152-sanyo-audio-power-amplifier-ic-lv49152v

I am quite certain LV49152 is also used in other main boards from Sanyo and likely other manufacturers.

Please note it is a bit tricky to solder the IC properly on a board. Pay special attention to providing good soldering contact of the exposed pad underneath the IC - cook it slowly and do not overdose soldering paste!

Hope this helps!



Thursday, November 15, 2012

Repair kit for 6871QYH039B LG YSUS sustain board

Question:
Dear Ccoppell TV Repair,

Tom Wilcox

I have reviewed your online store and have not located this particular part, maybe I'm just overlooking it but I need your help Identifying it and/or your listing for it,please.

from LG50pc3d-ud plasma,, ysus board 6871qyh039b,, ipm 201 #yppd-jo16e-c and ipm 202, yppd-j015e-c.

016e has pin layout 7 on one side, the other 3,6,1 and 3
015e has pin layout 7 on one side, the other 6, 6, and 6

please send listing or correct replacement part number and pricing info.

thanks,Tom

P.S. I want to say thanks for the help I have gotten via your blogs! great job!
Answer:
Our store is definitely a work in progress as of November 2012. 
We apologize about that.
Here is the link for the 6871QYH039B repair kit...(currently only serving USA customers):

http://www.coppelltvrepair.com/p/99/6871qyh039b-ysus-board-repair-kit


Wednesday, November 14, 2012

Repairing 4H.V1448.481 backlight inverter board from Insignia-NS-LCD37-09

A year ago I posted an article about replacing the original inverter in Insignia NS-LCD37 LCD TV with 4H.V1448.481 since it was more available and cheaper.

Well since then the newly installed inverter has also failed - in fact twice - and the second time I opted to repair it as opposed to replace it since I already had a dud handy.

The same backlight inverter 4H.V1448.481 is used in a good number of other LCD TVs such as Philips 32PFL5322D/37, PROSCAN 37LB30QD, Sanyo DP37647 and in fact many more, so hopefully this will help others in same boat.

Failure symptoms were the same both times - display will lit up for a split second and will then turn black, the TV otherwise still operating properly.

Inspecting the inverter I found a blown SMD fuse - one of several along the length of the board - and that told me in which section the problem will be.

Here is how the fuse looks like:
As can be sen from the picture the fuse is 3A/32V and is driving two power transistors, each of which in turn drives a transformer on the board (well the last can not be actually seen on this picture; just take my word for it, ok?).

So there is one such fuse for every two power transistors / transformers and you will be looking for a fuse that is blown and does not have continuity.

Once I got the group, I first ruled out the power transistors by comparing them and finding out that they have the same resistance as all others.

The culprit turned out to be - not surprisingly actually - one of the two transformers although I could not figure which one until I put a more powerful fuse (5A as opposed to 3A) and tried to see what happens.
But I do not recommend you do that.

As it turned out, the bad transformer could very easily be distinguished once pulled out of its place and inspected on the back.

Here is what it looked like:



Clearly it was the primary winding that has burned and because it has low resistance I could not find the difference with a meter.

The board itself also had traces of burning:


Replacing the transformer with a pull-out from the first defective board restored full functionality....for now.

Hope this helps!

Friday, November 2, 2012

KL15L5R1 blown on DYP-50W2 from Samsung HP-T5054 - where to buy

Just a week ago I posted an article about a SCK206 question and by pure chance today we had a power board DYP-50W2 from Samsung HPT5054 brought in for repair.

It had a visibly cracked component KL15L 5R1 which we tracked down and found a substitute for, then since customer was willing to pay extra for an express service we decided to take out a component from a working board and replace it in the customer's board, then wait and restore the substitute in our own good board...which we sometimes do if you're willing to pay for breaking a good working unit to get yours back faster.

Anyway, we found that our own board had the same SCK206 in place of KL15L5R1.

By the time we realized it the old thermistor was already out of the board so I could only put it next to the one that was originally placed on our own board.

Here is the picture (click to get native resolution):


In all fairness I didn't even look to track down SCK206 details and compare them.

If Samsung has decided it will do - and this was an original component there - then it will definitely do the job.

And if you are looking for KL15L5R1 then chances are SCK206 will do for you too.

BTW, as noted in the previous article the problem was not in the thermistor alone. Some power FETs were also blown and some of the driving logic around them too, although.

My recommendation is that unless you are a service tech well aware of the risk they're taking with a DIY project you better get a repair service or replacement board.

4 February 2014 update: We just posted an article on testing BN44-00160A DYP-50W2 and a bunch of other boards. You do not need that posting if you already know you have a blown thermistor, but the article may still be of help to others.

Friday, October 26, 2012

What is SCK206 green thingy and where can I get it?

Question:
Dear Coppell TV Repair,
my TV made a coughing noise , smoked a little and became yet another brick on the wall.
Upon inspecting the power board I found a little green round thing next to the main power input with a solid hole in it and the letters SCK206 printed.
I have some background in electronics, but I could not figure what this is. Capacitor is my first thought.
What is this and where can I get it?

Answer:
SCK206 is a power thermistor used in the switching/activation circuits of a number of power boards, usually in plasma TVs (of course quite possibly elsewhere too, but in the context of TV repairs it is usually found in plasma TV boards as opposed to LCD TV power boards).

It is often found in parallel to one (or the one) switching relays that activate when the power board is told to switch to full power by the main board.

It is used as a temporary load balancing device that takes the current in case another power component has shorted and leads to overload.

A failed SCK206 would typically mean power in a power FET or other power device has failed.

As such replacing SCK-206 alone will hardly ever be sufficient.

But if you still need it you can buy SCK206 here.

Wednesday, October 24, 2012

TV changing channels or volume by itself, where is the problem?

This article is about a not very common yet definitely annoying problem that can develop in any TV - LCD or plasma - and a basic troubleshooting guide to help narrow it down to a particular module.

It was prompted by a recent experience followed by a user question that has just arrived.

Question: 
Dear Coppell TV Repair,
I had you service the Y-SUS board in my HP PL4260N and it works fine.

I am having another problem with the TV now and was wandering if you have heard of it and if so how would I solve the problem.

The tv will start changing channels on its own along with volume and flash the menu.I ruled out the remotes and covered the ir, disconnected all cables and it still does it.

Do you have any ideas what it could be?

Answer:
The described problem of random channel change or volume increase or volume decrease can happen on any TV and I have seen it happen on different kinds of TVs.

There may be some that may be more prone to it - a common production defect is always capable of causing something like it - but I am not aware of any particular TV model where this is a known mass problem, including the HP PL4260N.

The good news is that on all TVs the troubleshooting process is relatively similar and also relatively simple.

The TV - be it LCD, plasma, LED, most likely projection TVs as well (although we don't do those) - can receive a command to change volume or channel in two major ways - the IR sensor or the on-unit navigation control, which in most TVs is in a form of several buttons.

Both these sources travel , usually independently from each other, to the main board where they are processed by the TV's "brain", the main board's micro controller.

Which means that the distortion can come from:
1) the TV's IR control unit including all the way to the main board
or
2) the TV's manual navigation unit, including wires all the way to the main board
or
3) something on the main board itself; because of the way the IR and the buttons modules operate this is more likely to be something in the navigation button's circuit than the other one, but either way it would be something on the main board.

To rule out the IR board you would want to just disconnect it from the main board. You can often do that at the plug on the IR board itself, but it is usually easier to just trace the cable from it to the main board and disconnect it there.
You can power on the TV and disconnect it then or you can disconnect it and power on automatically.
Either way you are trying to see if disconnecting the IR board will cause the volume or channel change to stop.

You do the exact same to rule out the buttons navigation board. Disconnect and power on through remote (of course IR board will have to be connected) or power on and disconnect from the main board.
If volume increase (or decrease) stops or channel flipping (or menu activation) stops, then it's something on the board or cable.
Literally two weeks ago I saw for the first time in my life a volume up button which has failed and had a constant 50 ohm resistance, resulting in a constant "vol+" response from the TV. TV owners said they don't ever use the button which is believable since almost everyone these days uses a remote. And yet it has failed.

At least once before I have seen the cable from the buttons panel to the main board get squeezed by and subsequently cut by the TV's bezel. I have also seen that same problem in other Chinese devices. Good companies - I think of Philips - design wire paths inside the body to prevent things like those from happening.

Anyway, if you rule out both of those then the problem is in the main board.

I have seen at least one case where a resistor has failed, near the buttons connector, and was causing the problem. Most if not all modern TVs do not have dedicated wire for each button on the panel; instead, they use an analog to digital converter on the main board to convert resistance to digital level.
Buttons on the power board are simply resistors that get connected to a chassis; different buttons connect different resistance values, the main board converts that to a digital number and the main board maps a number to a function.
Stands to reason that any significant impedance (resistance) change in the circuit will lead to misfire.

Sometimes the problem may not necessarily be a resistor; it may be an active component, i.e. the ADC (analog to digital converter) itself.

Troubleshooting the power board is beyond the scope of this article.

Hope this helps!

Tuesday, October 23, 2012

Testing TOM277CABB for Digital Lifestyles LT42332 / FA2B-42570


Synopsis: This article talks about how to test if your STARMEN TOM277CABB power board is bad and points to a repair service and exchange service , if available, in case you need them.

*** Update with fast links ***
**************************
A few days ago we were asked to repair a power board TOM277CABB made by STARMEN .
It is used in a number of 42'' LCD TVs such as Digital Lifestyles FA2B-42570, LT42322, ARION AD-LC42F, SOYO MT-SYTPT4227AB and possibly others.
Since Digital Lifestyles is now out of lifestyle and since it was a low end brand to start with (which doesn't necessarily means the TVs were of bad quality) there is no technical documentation available for it and that makes troubleshooting a bit harder.

Here is how TOM277CABB looks like (click to enlarge):


If you doubt that your power board is bad what you can do and should do is test it independently from the TV to see if it provides the standard standby power voltage (+5V SB) and then , if signaled by the main board, the rest of the voltages it is supposed to generate.

All it takes is a simple voltmeter and knowledge where the output voltages are on the board.

Upon connecting the board to AC the only output voltage it should generate is the +5V standby.

Then, when those 5V standby are passed to a dedicated "power on" (wake up) pin the rest of the board activates and generates the 5V/4A, 12V/3A and 24V/9A powers as indicated on its label above the large transformer at the top (see picture).

More civilized manufacturers label connector pins / meanings, but apparently STARMEN isn't among them, so here is the layout for you (again, click to enlarge):


As you can see the lower two power connectors are only used for the back light inverters; they are connected in parallel and they only provide the +24V inverter power.

The single connector above them is the one used to control the board and also provide power to the main board.

The only power you should find on it when connecting the board to AC is the +5V SB voltage measured to any of the ground pins (I used the rightmost ones on any of the lower connectors for ground).

And when you short those +5V to the POWER ON pin, which is extremely easy since it is right next to the +5V, the rest of the voltages should come up.

COMMON PROBLEMS WITH STARMEN TOM277CABB

Probably the most common issue with the board will be the failing electrolytic filter capacitors at the board's outputs (can be seen between the heat sinks at the left side of the board at the top picture - groups of 4,3 and another 3 capacitors).

When those go bad they are usually easy to tell visually as their tops are bulging and sometimes leaking electrolyte; sometimes it may be the bottoms as well.

The second issue we have seen on the board is a blown main fuse F1 caused by a failed/shorted transistor Q1; while we have not seen it at the time of this article, failure of such a transistor can sometimes take down other less powerful components as well, so be aware and check around as well.

We offer DIY repair kits for STARMEN TOM277CABB and we may add or modify them over time as more information comes in and demand changes.

Also, when available, we may be able to offer an exchange service for STARMEN TOM277CABB.

Finally, if the matter is not just a swollen capacitor, you may consider using our TOM277CABB repair service.

Wednesday, October 17, 2012

How to test STK795-813 IPM for defects

Half the STK795-813 ICs we received the last time from our vendor were defective.

Here's a short note I just wrote to them asking them to please save time and money and test the ICs before they send them in future.

This will also be of great help to all other US "vendors" who are not competent enough to do it on their own, which is probably the majority. No offense meant, that's what I see and hear from customers.

The test is not complete, meaning an IC may pass it and still be bad, but that will be one in a few hundred in our experience. It's a quick, simple and easy test which easily takes care of the most common failures.

BTW you can also buy STK795-813 - already tested! - at our store, for as long as supplies last.

And here is the text:


Here is a picture of the STK795-813 with the important pins:
(please forgive the bad quality - click to get a large view; I was on a rush)



You will usually be testing the IC looking from the top, but I only thought of that after I made the picture...you may want to make a drawing on your own if you want, just make sure to note that when you flip the chip upside down positions change symmetrically :-)
 
Testing is similar to the way you test the STK795-518, only the legs are different.

The testing device will still be in “diode” mode where if you touch the two probes it will beep to indicate short circuit.

In the test you will be touching different pins of the IC, not the two probes of the device.

But before starting you make sure the device is properly set up by touching the two probes for a moment. The device should beep.

You will make 3 tests on each IC.

If any of them results in continuous beep and reading of “0” (or the same reading on the display as you get when you touch the two probes of the meter and hear beep) then the IC is bad.

You will be testing:

1)      VS to GND
2)      VS to SUS_O
3)      GND to SUS_O
Each of the contacts (VS, GND and SUS_O) has multiple pins on the IC, i.e. all pins in the group are the same and it does not matter which one you will try on.

I do not know if the ICs I sent back have already arrived, but you can practice on them – all of them have at least one of those three combinations shorted.

Let me know how it goes.

Wednesday, October 3, 2012

Myths and misconceptions about (repairing) plasma and LCD TVs

A good deal - I guesstimate anywhere from 10% to 20% - from our support calls start with something that can be summarized this way: "My TV stopped working and I need to know if you have power board for it, becuase that's what is bad, right?"

Internet posts from DIY experts and self-promoting TV technichians add a great deal of confusion to almost any failure since almost everyone who was successful at their first DIY repair tends to assume this is a common problem for the TV and describes both the symptoms and the solution with the capacity of an experienced technicians who has seen and done it all.

Which is hardly ever close to the truth in the big picture of common failures and the various post-failure symptoms they cause.

In this article I will review a few popular misconceptions that we at Coppell TV Repair are encountering pretty much on a daily basis.

 

1) If TV does not start up the problem is in the power board

As said earlier this is the most common confusion we are seeing among first time callers. They often cite Internet as a source for their self-diagnostic and at least half the time they are wrong.

I have personally seen and corrected many posts at Fixya where someone considering themselves an expert - or simply someone willing to help without realizing they're doing exactly the opposite - authoratively advises someone with a question that the problem is in their power board.
Sometimes they may be right, of course.

But very often they wouldn't.

The first and most important piece of information is always the specific TV model as the issue is first and foremost specific to a particular board in that model.
(And this is why our diagnostic service starts with it.)

Next , at least for me, is the display technology as it has a great impact over the architecture and risks associated with the power board.

Plasma TVs, for example, have more powerful and more complex power boards, which feature more protection mechanisms; in addition, plasma TVs are prone to failures in other modules - specifically the sustain boards - which are, in a way, also power boards fed from the main power board and a TV would often refuse to start if a sustain board has failed and shorted.

Moral: Do not assume what's wrong with the TV just because someone said so, unless you know that someone is good at what they say.

2) If TV doesn't work replace the capacitors!

That's probably the second most widesread myth about failures.

Oh yes - bad capacitors can cause tons of problems. In certain modes and batches of those models.

They'll be OK on others and they will be the last issue to develop on many many other TVs.

For example the infamous Dell W4201C has an issue with two capacitors in the power board, but only in some TVs; in others, different capacitors were used and the power boards go for years and years, giving way to the guaranteed problem with the failing buffers and Y-Main board.

Or say the Sanyo DP46819 or Sanyo DP52449 and others Sanyos from the same family...the main board is way more likely to develop a problem than the power board and it won't be capacitors either.

Being still popular, the capacitors replacement business have created companies offering just a bag with all electrolytic capacitors from a certain board and proudly labeling it "repair kit".
I've seen a few such listings on eBay, for example this one and this one, which are funny, because they offer to resolve a problem, which practically does not exist.

Power board BN44-00161A has a high failure ratio and to my amusement there was a popular vendor on eBay who was selling for a long time a "repair kit" of 2 capacitors and 4 FETs, a combination which I have never, in hundreds of repaired boards, seen needed together, but definitely falling short of covering the most common failure on that board. It took them two years before they started selling the right kit!

Moral: Repair kits are like drugs - there's tons of them out there and everyone's claiming theirs is the best, but ultimately the only good repair kit is the one that targets your particular problem. Make sure to find detailed description of the problem they target and verify they come from a vendor who knows about TV repairs and doesn't just read Internet like you do :-)

3) Plasma TVs should not be laid horizontally

I don't know why people have that idea. When I asked a few times I got "well somehow I just thought so".

Plasma TVs have gas in their displays and gas, being intert, does not care if it is horizontally or vertically oriented in space.

You can do keep or service your plasma any way you want.

One of the benefits of servicing it horizontally is that it's harder to lose a metal bolt or screw down the boards.

Moral: If you lose a screw between the boards turn your plasma upside down and shake hard until you get your stuff back on the floor. It's fun!

 

4) Buying used boards from chop shops is a good idea

Well that one is kind of true...sometimes.

It really depends on the board and the failure it gets.

Some boards - particularily plasma TV buffer boards and sustain boards - are known to age with time, in fact fairly fast - 3,4,5 years...and they just fail at the end.

When a chop-shop like ShopJimmy , DiscountMerchant or any other one really, buys tons of liquidated TVs, take the boards out and sells them, they have no way of knowng how long did those boards work before getting to them.

Frankly, I dare say most of them do not know (or have not been knowing for a very long time) that the parts they were selling were fast disposables and having arrived from a used TV they have a very short life.

Of course for many other cases chop-shops are not only useful, but often only available alternative.

Moral: New is always best and sometimes repaired is definitely better than used.

5) It is best to buy replacement boards from the same brand than others

Again, it depends a great deal. Some boards you can only buy from that particular brand.

More often than not, though, you can buy the same board from a completely different brand of a TV and use it at 100%.

This is particularily true for plasma TVs where there are several major plasma display technology, which develop practically the whole plasma-related part of the television - specifically the display and the boards that make it show picture - and license it to the rest, who use their own main boards, menus, internet connection etc. stuff that is secondary to the display itself.

As of 2012 easily 90% of all plasma TVs in USA - that's over 50 brands - are made by only 3 companies: LG, Samsung and Panasonic. Fuji and Hitachi have some market, but I don't think it is of significance (except for people needing Hitachi buffer boards I guess).

Which mean that the plasma display and sustain boards in HP PL4260N are practically the same as the display and sustain boards in Viore PDP42V18HA. They work the same, fail the same and can be serviced the same.

Oh sure, HP is giving the boards different name so that customers get back and buy the same boards from HP - usually for more - but it's still the same board.

Moral: Do not buy from Viore unless you know what you're doing. HP has the same LG BS, but at least it gives you the impression of a higher quality.

 

Monday, September 24, 2012

How to test power board MLT386X from AKAI LCT3701AD / LCT3785TA / LCT37SHA

Question:

Dear Coppell TV Repair,
Where do I find your blog on testing my power board before I purchase the repair service?




Answer:

I will post a pictorial on this board as soon as I can , I promise...but I am just swamped at the moment.

So instead I will ask that customers in need just read the articles on the previous MLT versions and apply the knowledge from there.

Everything is 100% the same, only the connector locations and sizes are different.

But all control and output labels are the same and have the same functions.

So please refer to the following two articles:

http://blog.coppelltvrepair.com/2011/02/mlt168a-power-for-ilo-lct27ha36-akai.html

http://blog.coppelltvrepair.com/2012/02/how-to-test-mlt186-power-board-for-akai.html


And if you want to send the board here for service use the following link:
http://www.coppelltvrepair.com/newservice

Wednesday, August 29, 2012

How to fix cracked or scratched glass of a plasma TV

Before getting in any details I must clarify: every plasma TV is made up of a glass plasma display and a plastic or tampered glass protective cover on top of it; what you touch at the front of a plasma TV is not the display itself, which is fairly thin and very fragile. What you touch is the protective glass, which serves dual function - protects the actual plasma display and protects the viewers from the radiation emitted by the display (a UV or other kind of filter - frankly I do not know what exactly, but it doesn't matter as long as you know it is meant to be there to serve such a purpose).

So this article is about the rare case of having an intact display and cracked or scratched protective layer.

This is much more rare than the opposite - intact protective layer and cracked/broken display, but just yesterday a walk-in customer proved it is not impossible to achieve.

How did his kids manage to do it I am still not sure, but he maintained they somehow did and as a result his 42'' Magnavox 42PF7220A/37 ended up with intact display and a cracked protective window, which, being thick and cracked, presented notable obstruction to proper viewing.

He asked if we have such a widow and of course was not surprised to find we didn't. He said he found one on eBay for about $270 or so, but of course that didn't make any practical sense.

So I looked around and simply offered him to use a protector from one of the many 42'' plasma TVs we had from about the same time , which had broken displays or were otherwise laying around waiting for better days to finally go to garbage.

In his case it was a  Vizio P42HDTV10A I ended up giving him the window from.
I made $40 I would have otherwise dumped at the trash and he seemed happy too so I guess price was right for him as well.

He said it was slightly larger, but acceptable.

If you end up in the same boat just go to a few local TV shops and ask them for old units of the same size...I wouldn't pay more than $50 for one, $35 is probably more accurate if you have to do all the work to get the glass out.

Good luck!

Bobby @ Coppell TV Repair

Saturday, August 11, 2012

SAMSUNG HP-T5064X/XAA sound with no image - failed power board BN44-00162A...or not?

Note: below is a correspondence between us and a customer regarding his Samsung HP-T5064.

100% of what is said applies to the more popular model HP-T5054 as well as actually most other plasma TVs manufactured about the same time.

There's more to be said about them and I will maybe post another article about it, but this time the focus is on the common mistake I see of blaming the power board after reading a few misleading (and ofter confused by themselves) opinions by "experts" on sites like FixYa or Answer.com.

02 February 2014 update: We just posted an article showing how to test power supply boards BN44-00161A, BN44-00162A , BN44-00160A and others.



Customer:
Dear Coppell TV Repair,
I have a Samsung HP-T5064X/XAA and I believe I have a failed SMPS board, part #BN44-00162A.  I prefer to not replace individual components parts to make the repair.  Two questions:
1.  Do you sell the SMPS board?
2.  If not, can you repair the board if I bring it in?  (I'm a little west of Ft Worth.)




Coppell TV Repair:

1)      Yes , I believe we have at least one at the moment. There are number of different board models that would do the job and I know we have at least one in working mode, but I also know I have at least three people about to drop by and maybe swap their bad board (if bad) with a good one

2)      Yes we do repair them whenever we can (we usually can). But the really important question here is

3)      Why do you think it is the power board that is bad and not , say, the trio of the Y-Main and the two buffers? Those fail way more often in your TV.




Customer:

Thank you for responding so fast.

I confess to being fairly electronics-dumb.  My guidance so far has been reviewing help websites (fixya) and going through others' troubleshooting steps.  I'm pretty good at soldering wires under the hood of a car, but soldering PCB is WAY beyond my abilities.  I was going to just replace the board rather than taking a chance on replacing components and then burning out the board anyway.

Here's the rundown of the problem:
The entire screen unexpectedly went black but sound remains.  It appears black, not dim.  I did the usual "wait and retry" but there is no change.

I removed the back cover and inspected the 4 main boards (left side, right side, inputs board at bottom center, and the (SMPS board?) top center board that seems to be the master board that all others feed from via flat cable.  I see no signs of burning or soot.

I removed the cable from connection 807, plugged in power, turned on the TV and get normal start sound (4 ascending notes) and typical 4 slow pulses of the blue light.  No change in black screen.  I then turned off the TV and got the normal sound (4 descending notes) and the blue light stays on as it usual.  I unplugged the TV and reconnected the 807.  I repeated this process for the 808, 809, and 810 cables.  I got the same result every time.  This lead me to believe it is the SMPS board instead of one of the others.

I know that it is always a crap shoot trying to "diagnose via email", but then again, I'm sure you see this type of problem rather frequently.  Are you open today?  I'd rather not bring in the whole TV if possible, can you advise me what board(s) I should bring?  I'm more than willing to swap out plug-in components if that's what the repair entails, but when it comes to soldering boards, I'd rather leave that to you professionals.

Thanks for your help.  It is a pleasure dealing with someone local.




Coppell TV Repair:
 
Well your conclusion is incorrect.

Based on what you say it is highly unlikely for your problem to be in the power board.

First, if the power board does not produce the output voltages it is supposed to produce then its own control logic will catch the event and shut it off to prevent further damage.

The bare fact that the TV comes on and stays on (even without an image) suggests the power board is just fine.

Second, the description you give is the most common one for a typical failure in the Y-Main board and buffers , which I told you is the most popular in those TV – the unit comes on with no screen.

I don’t have the board handy (I am at home now), but when the Y-Main is bad there are a number of connectors you can disconnect and the result would still be the same – the TV would come on with no display.

Imagine removing the wheels on a car that does not turn on because of whatever problem with the starter; it would still not start, right? You could also remove the alternator to the same effect J

You are looking at about $240 in fixes and that’s if you bring the Y-Main board and the two buffers to us. The Y-Main will have to be repaired and the two buffer boards will most likely need to be replaced.

This explanation alone is well worth $20?

Isn’t it? :-)



Follow-up for the online post:
Hope this helps avoid this common confusing and save a little time and a few bucks.

A more generic way to send us boards is to use the free form for initiating a new service order:
Prices will sure change over time, but it is highly unlikely that they will go up in the near future.

We are well aware they are too high even right now, the problem is that the new buffer boards are very expensive still...and we know from long and bitter experience that this particular failure better be done right and expensive than cheap.

Friday, July 13, 2012

RCA 42LA45RQ NO PICTURE / NO BACKLIGHT PROBLEM AND REPAIR

Q: Dear Coppell TV Repair, the TV you once fixed for us is still working fine - thank you for that! - but our recently acquired RCA 42LA45RQ stopped working last night and we are naturally coming back to you. The TV is less than a year old and has been working fine until last night when it suddenly turned black as we were watching it. Now every time we try to turn it on it only flashes for a second and then goes black. Sound is otherwise working fine. Can you fix that? Any advice is greatly appreciated.
- Barbara and Jason Williams


A: Well actually we can. We just can't keep up enough with the blog to post of all the findings we have.

There is a known issue with the RCA 42LA45RQ resulting in just what you describe.

Before I get any further I need to explain that like other low-cost brands (no offense meant, it's becoming more and more popular) the RCA 42LA45RQ is known to come in several different variants internally.

If you dig a bit more around the net you will find that the same model yields several different options for the power board, for example.

Anyway, the issue is known to develop in power board AOYUAN AYL400207 as shown below:


(modified May 2013)
As of May 2013 we offer both a DIY repair kit for AYL400207 and a repair service for AYL400207. There is a good chance we might drop the repair service in future as other problems on the same board prove to be very difficult to isolate.

If you have any questions do not hesitate to ask!

Wednesday, July 11, 2012

Sanyo DP47460, DP42840, DP46819 and DP52449 problems and repair

October 2012 update: 
Coppell TV Repair now offers repair services for the below Sanyo LCD or plasma TV models. If you do not see your model on the list, follow this link to search our website as we may be already supporting it too! 
April 2014 update:
Here's another posting for a probably not so widespread yet definitely not unique Sanyo problem affecting HDMI ports:
http://blog.coppelltvrepair.com/2014/04/please-use-audio-3-input-for-dvi.html

A few weeks ago we fixed a 52'' Sanyo with a problem in the main board for a local customer.

The model was DP52449 and the problem was that when you turn it on it would never come up; the LED at the front would stay green for 5-10 seconds , then turn off for a second and then turn back green again for another 5-10 seconds and so on.

A little Internet research would reveal that the issue seems to be widespread among those TVs.
Resolving it took some time and resoldering on the main board with original parts from Sanyo (more on that later).

We haven't done a lot of Sanyo TVs before , but the news must have somehow gotten out because yesterday we were literally swamped with Sanyo LCDs of different makes and models - some with similar problems and some not so much.

The situation may be familiar to others, but it is new to us, so I've taken the liberty to take a minute and just list them here.

I may be posting individual hints and solutions later on, at the time I will just post the units that were brought to us in two days from end customers and local TV service centers along with the problem descriptions.

I'm also posting the pictures of each unique unit's specification sheet as a proof that this is not just a shameless advertising, but an actual stampede of TVs at our service shop.

Serial numbers have been manually removed on each picture.

NOTE: if you have a Sanyo TV with a similar problem and you need a service please contact us via the contact form at http://www.coppelltvrepair.com and do not post comments here...at least at the time of posting this online we rarely have the time to check blog post responses.

1) SANYO DP47460 SHUTS OFF AFTER BEING POWERED ON, BLOCKS AFTER 3 TRIES

    MODEL: DP47460
    MAIN BOARD: PWB.MAIN N8TE / 1AA4B10N24700 / N8VG MAIN
    PICTURES:




    COMMENTS: Screen comes up at initial power on for a brief time and then the TV shuts off. After three consecutive attempts the TV locks out and requires removal from AC power source in order to try turning on again, suggesting built-in protection.
Such problems are commonly caused by 1) bad solder joints (especially in BGA ICs) , bad voltage stabilizers - be it in the power board or the main board itself - and messed up memory configuration, usually due to power surges.
   SOLUTION: In progress as of time of this writing. We were able to narrow it down to the audio tract by removing the voltage feedback protection for the audio tract, though, and got the TV to power on and operate reliably without sound. Clearly either the audio amplifier or the audio power step-down converter is at fault here.

2) SANYO DP42840 - INTERMITTENT AUDIO, SHUTS OFF
     MODEL:  SANYO DP42840
     MAIN BOARD: PWB.MAIN.N7AL / 1LG4B10Y04600_B

    PICTURES:
  

    COMMENTS: This sounds and possibly is a variation of the above described problem. It is either bad power to the audio amplifier or bad amplifier itself.

 
3) SANYO DP46819 - DOES NOT POWER ON, GREEN LED CYCLES EVERY 10 SECONDS
    MODEL:  SANYO DP46819
    MAIN BOARD:  PWB.MAIN.N7EJ
    PICTURES:
COMMENTS: We've got two of those in and they both do the same. The problem is in the main board and requires precise component removal and replacement with an OEM Sanyo part.

You won't find that component - and neither the board itself - at a chop shop like SJ or even official parts vendor like MCM - component level repair is the only option here and for the record that's not something that can be done at home and - in most cases - by field service technicians.

If your TV suffers from the same symptom and if you want to send us your board for service please use the contact/shipping instructions link at http://www.coppelltvrepair.com and make sure to include your TV model and serial number from the label as shown on the above picture.


4) SANYO DP52449 - DOES NOT POWER ON, GREEN LED CYCLES EVERY 20 SECONDS;
    UPON FIXING THIS COMES UP WITH SAW-LIKE SOUND

    MODEL:  SANYO DP52449
    MAIN BOARD:  N7KE
    PICTURES:


COMMENTS: There were two separate problems in this TV. One was that it would never power on completely,  the back light would never activate and the front LED would only cycle. Fixing this required component level service of the main board.
Upon completing the service the TV would come on with very loud and trembling sound, nothing like what it was supposed to. We are still looking into this as of writing this article. It is most likely bad audio amplifier since the power going to it seems to be correct.
Update:  problem was found and attributed to failed audio power amplifier IC or amplifier itself.
Our modifications of the main board increase the load the amplifier can take, but even with it we STRONGLY recommend that you do not play audio at more than 70% of the sound level bar.

Friday, June 8, 2012

On testing charges, sustain lifespan, universal laws and oil changes

Dear Coppell TV Repair,

I have a Zenith Z50PX2D.
I'm not sure which module is defective (symptoms are exactly as described on many sites!)
If I send you both modules (Y-sus and Z-sus), could you verify which one is defective, do the repair and return both back. (so I only have to pay for 1 repair) ?
Thanks,
Nick
We often get asked similar questions and although I've touched on the subject previously, I'll answer this one direct and forward similar questions to this post in the future.

There are several things I want to cover, but I'll start with the answer to the question asked: yes, you can always send both sustain boards and let us determine which one is bad and service only that one.

However, you'll have to pay us for testing the other sustain board is working good and that is often a waste of your money.

Here are the most important reasons why:


1. TESTING BOARDS MEANS SERVICE CHARGES

I guess to many that sounds like blood sucking banking fees, but here are a few simple reasons why testing translates to costs and therefore to charges:
 We bench test every single board that gets into our service facility and that bench testing helps discover apparent problems and thus save us the time and effort to put the board in a real set.

If all bench tests pass OK, though, we must put the board in a set as this is the final and ultimate test.

Sometimes they pass it and other times they do not.

So one, it takes time to make certain a board works good and that time needs to be paid.

As the enumerator in the above sentence suggests there's more to it than just time.

Sometimes the board turns out to be defective or may fail while testing. Rarely, but when you do hundreds of them per month rare changes its meaning.

Suffices to say it happens more often than we'd like.

So when it happens it can burn another board - whether because the one we're testing is malfunctioning or just failed; for example a malfunctioning Y-Main board may easily kill a buffer board and a failed sustain , either ZSUS or YSUS, can sometimes kill the power board.

Meaning two, there is a certain statistical risk in testing boards and that also means extra cost.

Last but not least, there is also a pure human factor risk in operating, which is different than time and different than statistical risk of coming across a failed board or a board that decides to fail on you.

We all do mistakes sometimes and the more we work with something the more likely it is to happen.

So three, there's the human error factor that needs to be shielded.

In summary, this is why we (and everyone with any brain) need to charge for a simple test of a working board.

2. THERE IS LITTLE VALUE / GREAT RISK IN KNOWING THAT CERTAIN MODULES ARE "NOW" WORKING


As I've pointed out many times before, some modules have particularly limited life span.

In our case, the Y-sustain and Z-Sustain boards in Zenith Z50PX2D fall in this category as all other modules in the TV easily outlast them.

If the two boards have similar life span (which is normal to assume since they use the same components to perform very similar functions on both sides of the plasma display panel) then it stands to reason that one should expect them to fail shortly after each other.

There are no two completely identical objects in the universe, though, and if there are they aren't being treated absolutely equally by the rest of the universe, so they can't be naturally expect to fail at the exact same time, or even by the exact same time difference.

So what's the value of knowing that one such board is "working" when the other isn't?

Not much really.

It can fail on the next day or the day after or a month later. Maybe a year later although if they have been rally side by side from day one I'd say it is much more likely to be within several months than within a year.

Don't forget we have to charge you for telling you that it works now.

So how would it feel if it fails three days from now?

Wouldn't that be wasted money?!

For the record, we're OK doing it either way, as long as the customer understands the risks involved.

In my experience very few do.

SOME SUSTAIN BOARDS HAVE SIMILAR LIFE SPAN AND OTHERS DO NOT
It is important to point out that while YSUS and ZSUS in all plasma TVs have very similar functions and often times similar implementation, it is not technically correct to assume that they necessarily have the same lifetime.

Sometimes the YSUS and the ZSUS are actually implemented differently and other times external factors may be causing the failure and it may only be affecting one of the boards. This is most commonly the case when a buffer board fails and causes damage in the YSUS.

Not all TVs have that problem either, so there's no golden rule that works in all cases other than "buy a new TV".

If your TV has those sustain boards:

or this sustain board (too lazy to make picture of both, so just the Y-Main, sorry):

then the above considerations definitely apply to you as those tend to go bad in pairs.


ON HAVING FAILURE SYMPTOMS "EXACTLY AS DESCRIBED AT MANY SITES"


Hope that doesn't sound like picking on potential or current customer, but the Internet is so full of sh*t you'd be better off quoting it anyway.

People (including me) often assume that what they've experienced once or twice or three times represents general trend and formulate their experience as a general trend.

For example "the most common cause of the failure is the Y-Main board" [because my Y-Main has failed or because I've seen two, maybe three in a row where it failed].

Or "I opened my TV and didn't see any bulged caps on the power or sustain board". Well yeah, you won't because that's not what goes bad in your particular case even though Internet is full of people and cases where bulged capacitors were the problem.

To make things even better different failure syndromes (depending on how described) can be caused by completely different reasons.

A short on either YSUS or ZSUS board would cause the same automatic shutdown that can also be caused by a randomly failed power board or main board.

A failed YSUS board in one TV could result in completely different behavior from the one failed in another TV of the same model. Say on one they used Y-Main boards with IPMs from LG and in the other they used Y-Main boards with IPMs from Sanyo.

One would fail with a loud pop (maybe, most of the times anyway) and the other will go so quietly you may never actually notice it.

One may result in a dark screen, the other - in blinking.

It's the same failure (well almost), but two very different experiences and indications.

One can navigate through all of that on their own, of course....just as one can change their oil in the car, for example.

Most of the people - again including me - have their oil replaced by someone who's maybe not smarter, but definitely more efficient doing it.

Efficiency is a good thing.


Related: 
Should I replace one or both sustain boards in my plasma TV?
How to identify failed sustain board for HP PL4260N?



Wednesday, May 9, 2012

Vizio VA320M does not power on or has negative image after replacing main board

Recently I worked on a Vizio VA320M LCD unit, which, when turned on, would change the color on the front side "Vizio" sign from yellow to white and stop there.

There was no sound and no picture in the unit, but it would respond to power off command and switch back from white to yellow.

My first thought was that it was a problem on the inverter, but after a little research I found that it wasn't.

How can you know it's not the inverter?

Well it's simple: you can see the +5V line on the power connector and you can measure it to see if there are +5V there.

Then you can measure the "back light on" line (BL_ON) and see that there is no logical 1 there (namely anything above 2.5V).

You can take that a step further and short the two, i.e. pass +5V to the BL_ON signal on the power connector and see the back light come on and stay on.

So the problem was apparently in the main board.

In my case it turned out to be either BGA soldering on the main board's processing IC gone bad or, possibly, memory corruption which was blocking execution of the main startup program leaving the TV in a somewhat un-initialized state yet good enough to allow shutting it down.

Below is the Vizio's troubleshooting guide for the situation:
It is clearly meant for absolute gurus and luckily that's what we are because we managed to properly diagnose and solve the problem even despite their help.

Anyhow, properly fixing the board required either BGA reworking or firmware flashing, i.e. service protocol reverse engineering and although a lot of fun, this also tends to be time consuming so we opted for leaving that for other high-end projects and just replacing the main board.

Here is the interesting part: Vizio VA320M comes , as often happens these days, in two different implementations: one is with an LG LCD panel and the other is with an AUO LCD panel and according T-Con board.

It's the same TV model, you can't tell the difference from the outside, but on the inside it uses two different display panels and different drivers for them.

Our main board was CBPFRD1KA1 and we couldn't find any store that was offering it, not at any meaningful price anyway.

So eventually we searched for "VA320M main board' and we found the following on SJ: "New Vizio CBPF9D1KZ2 Main Board for VA320M".

As listing clearly stated, this was from the TV version that had AUO LCD and the VA320M that we had was with the LG LCD...but what other chances we had? It was still faster (and cheaper) to get a working board than try to reverse-engineer the service protocol possibly after re-flowing the main IC on the board.

When the board arrived two days later we plugged it in out of curiosity and, not surprisingly, the TV came on...except it had some badly messed up colors.

Unfortunately I did not take a picture of it in time, but you hardly care that much anyway...you may already be seeing one after all :-)

So what we ended up doing was replacing the LCD signal matrix encoding IC U405 on the working board with the one from the original LG board.

To make it easier for the operations we temporarily removed one nearby capacitor.

Here is a snapshot of the board with the two removed signal encoders (click to enlarge):

As you can see one of the ICs has an AUO label and the other has an LG label.

It was a precision job, but not nearly as difficult - or risky - as re-flowing the main IC on the faulty board.

And, of course, it worked flawlessly if you don't count the slightly melted LVDS connector :-)

Hope that helps!